Marking a Shoe Sorter

A Shoe Sorter is marked by one SimItemBlock, at the beginning of the sorter. The length of the sorter will be determined by the beginning of the next conveyor.

Chutes connected to the sorter should specify the sorter "From" connection (see diagram).

Positioning

The block is placed at the beginning of the sorter in the centre. The end of the sorter is determined by the block marking the beginning of the next conveyor.

Rotation

Enter the direction of the conveyor on the XY plane in degrees between 0 and 360 degrees.

• Rotation 0 is parallel to the X axis, towards increasing x coordinates
• Rotation 90 is parallel to the Y axis, towards increasing y coordinates

Attributes

Example